ScreenOS: Difference between revisions

Revision as of 19:08, 8 August 2008

ScreenOS is the operating system that runs on Juniper firewalls, such as the NetScreen-5000 series, SSG 500 series, and SSG 5 series.

Don't try these at home, kids. They might blow up your network, brick your firewall, or get you in trouble with your significant other.

Command	Description	Requirements	Minimum Version
`reset peer`	Resets the peer NSRP device (without confirmation)	NSRP	ScreenOS 5.x
`exec nsrp sync config save to vsd-group n`	Saves the cluster configuration to the peer NSRP unit of VSD group n	NSRP	ScreenOS 5.x
`exec enetdrv bdreset ...`	Resets the bdpool for the ethernet driver	Switch must be present	ScreenOS 5.x
`set log display-style ...`	Changes the event log style to tabular or free	N/A	ScreenOS 5.x
detail\|wildcard]	Displays the software rule contexes	Firewall must not have ASICs	ScreenOS 5.x

@@ Line 15: / Line 15: @@
 |<code>exec nsrp sync config save to vsd-group ''n''</code> || Saves the cluster configuration to the peer NSRP unit of [[VSD]] group ''n'' || NSRP || ScreenOS 5.x
 |-
-|<code>exec enetdrv bdreset ... </code> || Resets the bdpool for the ethernet driver || Switch must be present (NetScreen-5GT and certain SSG models) || ScreenOS 5.x
+|<code>exec enetdrv bdreset ... </code> || Resets the bdpool for the ethernet driver || Switch must be present || ScreenOS 5.x
 |-
 |<code>set log display-style ... </code> || Changes the event log style to tabular or free || N/A || ScreenOS 5.x
+|-
+|<code>get swrs ctx ''n'' [pol|detail|wildcard]</code> || Displays the software rule contexes || Firewall must not have [[ASIC]]s || ScreenOS 5.x
 |-
 |}