ScreenOS: Difference between revisions

Latest revision as of 01:23, 26 October 2018

ScreenOS is the operating system that runs on Juniper Networks firewalls, such as the NetScreen-5000 series, SSG 500 series, and SSG 5 series.

These are totally unsupported by Juniper.

Command	Description	Requirements	Minimum Version
`reset peer`	Resets the peer NSRP device (without confirmation)	NSRP	ScreenOS 5.x
`exec nsrp sync config save to vsd-group n`	Saves the cluster configuration to the peer NSRP unit of VSD group n	NSRP	ScreenOS 5.x
`exec enetdrv bdreset ...`	Resets the bdpool for the ethernet driver	Switch must be present	ScreenOS 5.x
`set log display-style ...`	Changes the event log style to tabular or free	N/A	ScreenOS 5.x
`get swrs ctx n pol, detail, wildcard`	Displays the software rule contexts	Firewall must not have ASICs	ScreenOS 5.x

@@ Line 1: / Line 1: @@
-ScreenOS is the [[operating system]] that runs on [[Juniper]] firewalls, such as the [[NetScreen]]-5000 series, SSG 500 series, and SSG 5 series.
+ScreenOS is the [[operating system]] that runs on [[Juniper Networks]] firewalls, such as the [[NetScreen]]-5000 series, SSG 500 series, and SSG 5 series.
 == Hidden Commands ==
-Don't try these at home, kids.  They might blow up your network, brick your firewall, or get you in trouble with your significant other.
+These are totally unsupported by Juniper.
 {|border="1" cellpadding="2"
@@ Line 19: / Line 19: @@
 |<code>set log display-style ... </code> || Changes the event log style to tabular or free || N/A || ScreenOS 5.x
 |-
-|<code>get swrs ctx ''n'' pol, detail, wildcard</code> || Displays the software rule contexes || Firewall must not have [[ASIC]]s || ScreenOS 5.x
+|<code>get swrs ctx ''n'' pol, detail, wildcard</code> || Displays the software rule contexts || Firewall must not have [[ASIC]]s || ScreenOS 5.x
 |-
 |}